Peerless by Tymphany 830452 10″ XLS Subwoofer
Product description
This series of state-of-the-art subwoofers continues to enhance Peerless's reputation for delivering the highest quality components for bass.
Highlights
- 12.5 mm of linear excursion
- Thick Nomex cone
- Cast aluminum frame
- Flat spider and HD rubber half roll surround
- Massive stacked magnet
Product details
Peerless by Tymphany XLS-P830452 10" XLS Subwoofer This 10 inch 4 ohm member of the XLS product family has all the design features suitable for a high performance subwoofer driver. The motor features a double ferrite magnet motor, supporting high excursion, and aluminium shorting rings and pole extenders, lowering and linearizing the inductance of the overhung voice coil. The nomex cone is vented under the dust cap, to reduce air compression. The suspension system features a low-creep rubber surround, and a nomex spider, ensuring long-term reliability under high power conditions. The product also features a rigid cast aluminium basket.Specifications
Article number XLS-P830452
Woofer Series XLS Series
Woofer Type Subwoofer
Nominal Diameter 10"
Power Handling (RMS) 150 Watts
Power Handling (max) 300 Watts
Impedance (Z) 4 ohms
Sensitivity 86.6 dB 2.83V/1m
Frequency Response 19 to 700Hz
Voice Coil Diameter 2"
DC Resistance (Re) 3.6 ohms
Voice Coil Inductance (Le) 0.99 mH
Resonant Frequency (Fs) 22 Hz
Mechanical Q (Qms) 3.86
Electromagnetic Q (Qes) 0.24
Total Q (Qts) 0.23
Diaphragm Mass Inc. Airload (Mms) 136.6g
Mechanical Compliance of Suspension (Cms) 0.39 mm/N
Surface Area of Cone (Sd) 349.7 cm²
BL Product (BL) 16.75 Tm
Compliance Equivalent Volume (Vas) 2.36 ft.³
Maximum Linear Excursion (Xmax) 12.5 mm
Cone / Diaphragm Material Paper
Surround Material Rubber
Basket / Frame MaterialCast Aluminum
Magnet Material Ferrite
Overall Outside Diameter 10.59"
Overall Depth 4.88"
Baffle Cutout Diameter 9.4"
# Mounting Holes 6
Sealed Volume 0.12 ft.³
Sealed F3 95 Hz
Vented Volume 0.24 ft.³
Vented F3 65 Hz
Download PDF File
Peerless by Tymphany 830656 5-1/4″ Paper Cone SDS Woofer
Peerless SDS Line 830656 5.25" Woofer
- Coated paper cone
- Rubber surround
- Aluminum voice coil
- Soft roll spider
- Sealed box of 0.2 cubic feet for an F3 of 90Hz
- Vented box of 0.25 cubic with 1.5" diameter vent by 4" long for an F3 of 68Hz




Download PDF File
Peerless by Tymphany 830657 6-1/2″ Paper Cone SDS Woofer
PRODUCT INFO
Peerless #830657 SDS Line 6.5" Woofer
The SDS compact subwoofer family offers low resonant frequency performance, ideally suited for compact sealed enclosures. This 6.5 inch 8 ohm member of the SDS family offer a coated paper cone with rubber surround, a high power voice coil suspended in a ferrite magnet motor, and a narrow profile steel basket, shaped to fit into narrow cabinets.




Download PDF File
Peerless by Tymphany 830869 8″ Nomex Cone HDS Woofer
PRODUCT INFO
This 8 inch 8 ohm driver is a member of the high performance HDS family. A powerful ferrite magnet system is coupled to a finite element analysis designed suspension system, containing both a linear spider design and a rubber surround. The motor contains an aluminium shorting ring, which reduces coil inductance, thus providing both extended frequency response performance and reduced distortion. The long-throw voice coil ensures linear high excursion performance, needed for signal clarity. The cone necks are vented so as to reduce air compression effects under high excursion conditions. The cast aluminium basket offers structural rigidity, heat sinking capacity for the motor, and additional air venting under the spider so as to again reduce air compression effects. The cone in this model is nomex based, offering a unique visual and acoustic experience.
Download PDF File
Peerless by Tymphany 830875 6-1/2″ Nomex Cone HDS Woofer
This 6.5 inch 8 ohm driver is a member of the high performance HDS family. A powerful ferrite magnet system is coupled to a finite element analysis designed suspension system, containing both a linear spider design and a rubber surround. The motor contains an aluminium shorting ring, which reduces coil inductance, thus providing both extended frequency response performance and reduced distortion. The long-throw voice coil ensures linear high excursion performance, needed for signal clarity. The cone necks are vented so as to reduce air compression effects under high excursion conditions. The cast aluminium basket offers structural rigidity, heat sinking capacity for the motor, and additional air venting under the spider so as to again reduce air compression effects. The cone in this model is nomex based, offering a unique visual and acoustic experience.
Download PDF File
Peerless by Tymphany 830878 3-1/2″ Passive Radiator
A useful alternative to overlong ports, passive radiators like the Peerless 830878 offer designers a well-proven method of extending and enhancing bass response.
Key Features
- Coated paper cone with rubber surround
- Low resonance frequency for deepest possible bass
- Cosmetic surface mount steel frame matches Peerless SDS series
- Straight-sided frame fits into narrow enclosures and permits tight spacing
- Compatible with small woofers by Peerless and others
Transducer Size (Millimeters) | 101.6 |
---|---|
DC Resistance | 0 |
Resonant Frequency | 0 |
Half Space Sensitivity | 27.04 |
Rated Noise Power | 0 |
Test Spectrum Bandwidth |
DOWNLOAD PDF FILE
Peerless by Tymphany 830946 6-1/2″ Paper Cone Woofer Speaker 4 Ohm
Product description
The Peerless SLS Series 830946 6-1/2" woofer is a versatile, solidly-performing choice for midbass, woofer, or subwoofer applications.
Highlights
- Works great as a subwoofer in compact systems
- Sculpted and vented stamped steel frame promotes motor cooling
- Powerful ceramic magnet system with bumped back plate for full excursion
- Coated paper cone with oversized half-roll rubber surround
- Long-throw 1-1/2" voice coil
- Aluminum shorting ring in magnetic gap reduces distortion
- 4 ohm nominal impedance
Product details
Peerless by Tymphany SLS-P830946 6-1/2" Paper Cone Woofer The SLS line combines high quality performance with an affordable design. This 6.5 inch 4 ohm member of the SLS family features a rigid steel basket, a paper cone, and a ferrite magnet motor with aluminium shorting ring for improved distortion performance.Specifications
Article number SLS-P830946
Woofer Type Woofer
Nominal Diameter 6-1/2"
Power Handling (RMS) 75 Watts
Power Handling (max) 150 Watts
Impedance (Z) 4 ohms
Sensitivity 82 dB 2.83V/1m
Frequency Response 20 to 1,000Hz
Voice Coil Diameter 1.5"
DC Resistance (Re) 2.71 ohms
Voice Coil Inductance (Le) 0.65 mH
Resonant Frequency (Fs) 42 Hz
Mechanical Q (Qms) 4.92
Electromagnetic Q (Qes) 0.38
Total Q (Qts) 0.35
Diaphragm Mass Inc. Airload (Mms) 30.5g
Mechanical Compliance of Suspension (Cms) 0.47 mm/N
Surface Area of Cone (Sd) 123.5 cm²
BL Product (BL) 7.6 Tm
Compliance Equivalent Volume (Vas) 0.4 ft.³
Maximum Linear Excursion (Xmax) 8.2 mm
Cone / Diaphragm Material Paper
Surround Material Rubber
Basket / Frame Material Steel
Magnet Material Ferrite
Overall Outside Diameter 7.165"
Overall Depth 3.28"
Baffle Cutout Diameter 5.79"
# Mounting Holes 6
Sealed Volume 0.09 ft.³
Sealed F395 Hz
Vented Volume 0.21 ft.³
Vented F355 Hz
Download PDF File
Peerless by Tymphany 830990 6-1/2″ GFC Cone HDS Woofer
PRODUCT INFO
This 6.5 inch 8 ohm driver is a member of the high performance HDS family. A powerful ferrite magnet system is coupled to a finite element analysis designed suspension system, containing both a linear spider design and a rubber surround. The motor contains an aluminium shorting ring, which reduces coil inductance, thus providing both extended frequency response performance and reduced distortion. The long-throw voice coil ensures linear high excursion performance, needed for signal clarity. The cone necks are vented so as to reduce air compression effects under high excursion conditions. The cast aluminium basket offers structural rigidity, heat sinking capacity for the motor, and additional air venting under the spider so as to again reduce air compression effects. The cone in this model is a glass fibre composite, offering a unique visual and acoustic experience.
The Peerless High Definition Sound (HDS) Series offers high-quality solutions for multi-way speaker systems employing vented box alignments.
Key Features
- Truncated cast aluminum frame
- Glass-Fibre Composite (GFC) cone with half-roll rubber surround
- Long-throw voice coil
- Shorting rings for reduced distortion
- Under-spider and voice coil ventilation
Download PDF File
Peerless by Tymphany 830991 5-1/4″ GFC Cone HDS Woofer
PRODUCT INFO
This 5.25 inch 8 ohm driver is a member of the high performance HDS family. A powerful ferrite magnet system is coupled to a finite element analysis designed suspension system, containing both a linear spider design and a rubber surround. The motor contains an aluminium shorting ring, which reduces coil inductance, thus providing both extended frequency response performance and reduced distortion. The long-throw voice coil ensures linear high excursion performance, needed for signal clarity. The cone necks are vented so as to reduce air compression effects under high excursion conditions. The cast aluminium basket offers structural rigidity, heat sinking capacity for the motor, and additional air venting under the spider so as to again reduce air compression effects. The cone in this model is a glass fibre composite, offering a unique visual and acoustic experience.
The Peerless High Definition Sound (HDS) Series offers high-quality solutions for multi-way speaker systems employing vented box alignments.
Key Features
- Truncated cast aluminum frame
- Glass-Fibre Composite (GFC) cone with half-roll rubber surround
- Long-throw voice coil
- Shorting rings for reduced distortion
- Under-spider and voice coil ventilation
Download PDF File
Peerless by Tymphany BC25SC06-04 1″ Textile Dome Tweeter
The BC family of tweeters features a damped fabric dome for smooth frequency response performance and ferrofluid in the gap of the NdFeB magnet motor,providing enhanced cooling of the voice coil. BC tweeters come with a compact faceplate with recessed mounting holes,and for this driver a finned heat sink has been added to improve power handling.
Download PDF File
Peerless by Tymphany BC25SC08-08 1 Fabric Dome Tweeter 8 Ohm
The Peerless BC25SC08-08 tweeter features an 8 ohm 25 mm voice coil, a damped fabric dome for smooth frequency response performance, a bucking magnet for higher sensitivities, and ferrofluid in the gap of the NdFeB motor, providing enhanced cooling of the voice coil.
Highlights
- Damped fabric dome for smooth frequency response
- Features a bucking magnet for higher sensitivity
- Utilizes ferrofluid for improved power handling
- Rear heat sink for improved heat dispersion
Peerless by Tymphany BC25SC08-08 Fabric Dome Neodymium Tweeter
PRODUCT INFO
This BC family tweeter features a 8 ohm 25 mm voice coil, a damped fabric dome for smooth frequency response performance, a bucking magnet for higher sensitivities, and ferrofluid in the gap of the NdFeB motor, providing enhanced cooling of the voice coil. The tweeter comes with a bucking magnet and a compact faceplate with recessed mounting holes, greatly increasing the sensitivity of the tweeter.A finned heat sink has been added for improved power handling.