Peerless by Tymphany 830990 6-1/2″ GFC Cone HDS Woofer
PRODUCT INFO
This 6.5 inch 8 ohm driver is a member of the high performance HDS family. A powerful ferrite magnet system is coupled to a finite element analysis designed suspension system, containing both a linear spider design and a rubber surround. The motor contains an aluminium shorting ring, which reduces coil inductance, thus providing both extended frequency response performance and reduced distortion. The long-throw voice coil ensures linear high excursion performance, needed for signal clarity. The cone necks are vented so as to reduce air compression effects under high excursion conditions. The cast aluminium basket offers structural rigidity, heat sinking capacity for the motor, and additional air venting under the spider so as to again reduce air compression effects. The cone in this model is a glass fibre composite, offering a unique visual and acoustic experience.
Download PDF File
₹6,040.00
TECHNICAL SPECIFICATIONS
| Driver Size | 6.5 in | – | ||
| DC Resistance | 6.23 Ω | ±5.0% | ||
| Resonant Frequency | 46.24 Hz | 15% | ||
| Half Space Sensitivity @ 2.83V | 88.36 dB | ±1.01 | ||
| Sensitivity @ 1W/1m | 87.8 dB | ±1.01 | ||
| Rated Noise Power (IEC 268-5 18.1) | 50 W | – | ||
| Test Spectrum Bandwidth | 20Hz – 3kHz 12 dB/Oct | – | ||
| Effective Piston Area | 143.1 cm2 | – | ||
| Moving Mass | 17 g | – | ||
| Motor Force Factor | 8.32 T•m | – | ||
| Voice Coil Inner Diameter | 32.41 mm | – | ||
| Gap Height | 6 mm | – | ||
| Maximum Linear Excursion | 5.3 mm | – | ||
| Ferrofluid Type | – | |||
| Minimum Impedance | 7.02 Ω | ±7.5% | ||
| Voice Coil Inductance | 0.42 mH | – | ||
| Mechanical Q Factor | 3.12 | – | ||
| Electrical Q Factor | 0.44 | – | ||
| Total Q Factor | 0.39 | – | ||
| Ratio | 119.17 fs/Qts | – | ||
| Energy Bandwidth Product ((1/Qes)•fs) | – | |||
| Suspension Compliance | 698.2 μm/N | – | ||
| Effective Cone Diameter | 13.5 cm | – | ||
| Motor Efficiency Factor | 11.1 (T•m2)/Ω | – | ||
| Voice Coil Former Material | ASV | – | ||
| Driver Mass | 1.58 Kg | – | ||
| Equivalent Volume | 20.09 L | – |
| brands | Tymphany |
|---|
HDS-P830990
| Platform: | Peerless |
| Driver Type: | Woofer |
| Size: | 6.5 in |
| Motor: | Ferrite |
| Frame: | Al Basket |
| Impedance: | 8 Ω |
| Diaphragm: | GF (Glass Fiber) |
Related products
-
Drivers, Tweeter
Peerless by Tymphany BC25TG15-08 Silk Dome Tweeter 8ohms
PRODUCT INFO
This BC family tweeter features a 8 ohm 25 mm voice coil, a damped fabric dome for smooth frequency response performance, and ferrofluid in the gap of the ferrite motor, providing enhanced cooling of the voice coil. The tweeter comes with a compact faceplate with recessed mounting holes, complete with sealing gasket which helps in reducing vibration between baffle and driver.
Download PDF File
SKU: n/a₹2,020.00 -
Drivers, Midrange / Midbass, Pro Audio, Woofer
Peerless by Tymphany FSL-0512R01-08 Professional 5-1/4″ Midrange Woofer Driver 8 Ohm
Drivers, Midrange / Midbass, Pro Audio, WooferPeerless by Tymphany FSL-0512R01-08 Professional 5-1/4″ Midrange Woofer Driver 8 Ohm
This 5.25 inch 8 ohm speaker features a FEA optimized ferrite magnet motor, a 1.2 inch high-temperature voice coil, and a high strength stamped steel frame. The multi-roll surround and spider have been optimized to reduce distortion over the excursion range of this transducer.
Download PDF File
SKU: n/a₹2,500.00 -
Drivers, Midrange / Midbass, Woofer
Peerless by Tymphany 830657 6-1/2″ Paper Cone SDS Woofer
PRODUCT INFO
The SDS compact subwoofer family offers low resonant frequency performance, ideally suited for compact sealed enclosures. This 6.5 inch 8 ohm member of the SDS family offer a coated paper cone with rubber surround, a high power voice coil suspended in a ferrite magnet motor, and a narrow-profile steel basket, shaped to fit into narrow cabinets.
Download PDF File
SKU: n/a₹2,700.00 -
Drivers, Full Range
Peerless by Tymphany TC6FD00-04 2″ Full Range Paper Cone Woofer 4 Ohm
PRODUCT INFO
This TC family 2 inch 4 ohm full-range driver,with ferrite magnet, paper cone and rubber surround, and steel basket, is designed to be a cost-effective high performance full range driver. The cone utilizes Tymphany-patented PentaCut NRSC cone technology to help dampen and control cone resonances, optimizing the listening experience. The motor contains a copper cap to lower inductance and distortion. The product was designed with television and other compact applications in mind.
Download PDF File
SKU: n/a₹1,035.00 -
Drivers, Tweeter
Peerless by Tymphany DX25TG59-04 1 Fabric Dome Tweeter
This DX family tweeter features a 4 ohm 25 mm ferrofluid-cooled voice coil, a damped silk diaphragm with large surround roll to produce a low resonant frequency, and a ferrite magnet motor which adds heat sinking for power handling capacity. The faceplate features recessed mounting holes to minimize reflections.
Download PDF File
SKU: n/a₹2,100.00
