Peerless by Tymphany NE315W-04 12″ Subwoofer Speaker
This 12 inch 4 ohm member of the NE family has leading-edge transducer technology packaged in a cutting edge, stylistic design. The subwoofers in this family feature an innovative cast aluminium basket design which minimizes acoustic reflections inside the driver, through large basket windows and sculpted basket spokes. The basket also is designed to act as a highly coupled heat sink to the NdFeB motor, so as to improve power handling capacity. An additional heat sink is available to provide extra thermal protection if needed. The cone and dust cap are constructed of natural wood fiber material with proprietary coating formulas & processes, so as to yield high clarity products. The cone designs also utilize pentacone technology for improved frequency response. The voice coil bobbin is titanium, for improved performance. The FEA-designed motor features copper caps to minimize inductance and extend performance to high frequencies. Rounding out the design is a 4-way terminal block connector, for ease of electrical connection.
Download PDF File
₹24,600.00
TECHNICAL SPECIFICATIONS
| Driver Size | 12 in | – | ||
| DC Resistance | 2.78 Ω | ±5.0% | ||
| Resonant Frequency | 19.94 Hz | 15% | ||
| Half Space Sensitivity @ 2.83V | 88.56 dB | ±1.01 | ||
| Sensitivity @ 1W/1m | 85 dB | ±1.01 | ||
| Rated Noise Power (IEC 268-5 18.1) | 150 W | – | ||
| Test Spectrum Bandwidth | 25Hz – 1kHz 12 dB/Oct | – | ||
| Effective Piston Area | 506.7 cm2 | – | ||
| Moving Mass | 113.9 g | – | ||
| Motor Force Factor | 11.12 T•m | – | ||
| Voice Coil Inner Diameter | 51.32 mm | – | ||
| Gap Height | 8 mm | – | ||
| Maximum Linear Excursion | 9 mm | – | ||
| Ferrofluid Type | – | |||
| Minimum Impedance | 3.55 Ω | ±7.5% | ||
| Voice Coil Inductance | 0.38 mH | – | ||
| Mechanical Q Factor | 15.6 | – | ||
| Electrical Q Factor | 0.32 | – | ||
| Total Q Factor | 0.31 | – | ||
| Ratio | 63.51 fs/Qts | – | ||
| Energy Bandwidth Product ((1/Qes)•fs) | – | |||
| Suspension Compliance | 559.2 μm/N | – | ||
| Effective Cone Diameter | 25.4 cm | – | ||
| Motor Efficiency Factor | 44.6 (T•m2)/Ω | – | ||
| Voice Coil Former Material | TiSV | – | ||
| Driver Mass | 2.68 Kg | – | ||
| Equivalent Volume | 201.66 L | – |
| brands | Tymphany |
|---|
| Platform: | Tymphany |
| Driver Type: | Subwoofer |
| Size: | 12 in |
| Motor: | Neodymium |
| Frame: | Al Basket |
| Impedance: | 4 Ω |
| Diaphragm: | Paper |
Related products
-
Drivers, Woofer
Peerless by Tymphany 830869 8″ Nomex Cone HDS Woofer
PRODUCT INFO
This 8 inch 8 ohm driver is a member of the high performance HDS family. A powerful ferrite magnet system is coupled to a finite element analysis designed suspension system, containing both a linear spider design and a rubber surround. The motor contains an aluminium shorting ring, which reduces coil inductance, thus providing both extended frequency response performance and reduced distortion. The long-throw voice coil ensures linear high excursion performance, needed for signal clarity. The cone necks are vented so as to reduce air compression effects under high excursion conditions. The cast aluminium basket offers structural rigidity, heat sinking capacity for the motor, and additional air venting under the spider so as to again reduce air compression effects. The cone in this model is nomex based, offering a unique visual and acoustic experience.
Download PDF File
SKU: n/a₹7,000.00 -
Drivers, Midrange / Midbass, Pro Audio, Woofer
Peerless by Tymphany FSL-0512R01-08 Professional 5-1/4″ Midrange Woofer Driver 8 Ohm
Drivers, Midrange / Midbass, Pro Audio, WooferPeerless by Tymphany FSL-0512R01-08 Professional 5-1/4″ Midrange Woofer Driver 8 Ohm
This 5.25 inch 8 ohm speaker features a FEA optimized ferrite magnet motor, a 1.2 inch high-temperature voice coil, and a high strength stamped steel frame. The multi-roll surround and spider have been optimized to reduce distortion over the excursion range of this transducer.
Download PDF File
SKU: n/a₹2,500.00 -
Drivers, Tweeter
Peerless by Tymphany BC25TG15-08 Silk Dome Tweeter 8ohms
PRODUCT INFO
This BC family tweeter features a 8 ohm 25 mm voice coil, a damped fabric dome for smooth frequency response performance, and ferrofluid in the gap of the ferrite motor, providing enhanced cooling of the voice coil. The tweeter comes with a compact faceplate with recessed mounting holes, complete with sealing gasket which helps in reducing vibration between baffle and driver.
Download PDF File
SKU: n/a₹2,020.00 -
Drivers, Midrange / Midbass, Woofer
Peerless by Tymphany 830657 6-1/2″ Paper Cone SDS Woofer
PRODUCT INFO
The SDS compact subwoofer family offers low resonant frequency performance, ideally suited for compact sealed enclosures. This 6.5 inch 8 ohm member of the SDS family offer a coated paper cone with rubber surround, a high power voice coil suspended in a ferrite magnet motor, and a narrow-profile steel basket, shaped to fit into narrow cabinets.
Download PDF File
SKU: n/a₹2,700.00 -
Drivers, Tweeter
Peerless by Tymphany BC25SC06-04 1″ Textile Dome Tweeter
The BC family of tweeters features a damped fabric dome for smooth frequency response performance and ferrofluid in the gap of the NdFeB magnet motor,providing enhanced cooling of the voice coil. BC tweeters come with a compact faceplate with recessed mounting holes,and for this driver a finned heat sink has been added to improve power handling.
Download PDF File
SKU: n/a₹2,000.00
