Click to enlarge
TL25 SN -04 25mm Silk Dome Tweeter - Low Fs Neo system peerless fabrikkern(i)ltd ₹1,200.00
Back to products
Peerless SLS-85S25CP04-04 3-1/2" Paper Cone Woofer 4 Ohm ₹1,850.00

Peerless by Tymphany SDS-135F25CP02-04 5-1/4″ Paper Cone Woofer

₹1,900.00

Product Info

The SDS compact subwoofer family offers low resonant frequency performance, ideally suited for compact sealed enclosures. This 5.25 inch 4-ohm member of the SDS family offers a coated paper cone with rubber surround, a high-power voice coil suspended in a ferrite magnet motor, and a narrow-profile steel basket shaped to fit into narrow cabinets.

The SDS-135F25CP02-04 5-1/4″ subwoofer from Peerless is perfect for adding powerful bass performance to portable speaker designs or small 2.1 systems. This high excursion driver is designed to excel in small enclosures.

Key Features

  • Paper cone and rubber surround for excellent damping
  • Cosmetic mounting flange for a clean look without flush mounting
  • Under spider venting for minimal power compression and high power handling
  • Great for building small subwoofers and adding low end to portable designs

Download PDF File

75 in stock

Add to wishlist
Category:
Description

Specification

DC Resistance Revc Ohms 3.3 5.0%
Minimum Impedance Zmin Ohms 4.45 7.5%
Voice Coil Inductance Le mH 1.22
Resonant Frequency Fs Hz 57.7 15%
Mechanical Q Factor Qms 3.89
Electrical Q Factor Qes 0.45
Total Q Factor Qts 0.41
Ratio Fs/Qts F Fs/Qts 142.47
Half Space Sensitivity @2.83V db@2.83V/1M dB 86.18 +/- 1.0db
Half Space Sensitivity @1W/1M db@1W/1M dB 83.6 +/-1.0db
Gap Height Gh Mm 6
Maximum Linear Excursion Xmax Mm 5.2
Ferrofluid Type FF
Driver Mass Kg 0.96
Energy Bandwidth Product EBP (1/Qes)*fs
Moving Mass Mms G 20.6
Suspension Compliance Cms Um/N 369
Effective Cone diameter D Cm 10.5
Effective Piston Area Sd cm^2 86.6
Effective Volume Vas L 3.91
Motor Force Factor BL 7.39
Motor Efficiency Factor ß (T*M^2)/Ohms 16.5
Voice coil former Material VCfm ASV
Voice coil inner diameter Vcd mm 25.73
Rated Noise Power P W 50
Test Spectrum Bandwidth 20Hz-10KHz
Driver Size Inch 5.25 in

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Peerless by Tymphany SDS-135F25CP02-04 5-1/4″ Paper Cone Woofer”

Your email address will not be published. Required fields are marked *

You have to be logged in to be able to add photos to your review.

Shipping & Delivery

Related products

Sold outHot
Compare

Peerless by Tymphany 830452 10″ XLS Subwoofer

₹16,300.00

Product description

This series of state-of-the-art subwoofers continues to enhance Peerless's reputation for delivering the highest quality components for bass.  

Highlights

  • 12.5 mm of linear excursion
  • Thick Nomex cone
  • Cast aluminum frame
  • Flat spider and HD rubber half roll surround
  • Massive stacked magnet
 

Product details

Peerless by Tymphany XLS-P830452 10" XLS Subwoofer   This 10 inch 4 ohm member of the XLS product family has all the design features suitable for a high performance subwoofer driver. The motor features a double ferrite magnet motor, supporting high excursion, and aluminium shorting rings and pole extenders, lowering and linearizing the inductance of the overhung voice coil. The nomex cone is vented under the dust cap, to reduce air compression. The suspension system features a low-creep rubber surround, and a nomex spider, ensuring long-term reliability under high power conditions. The product also features a rigid cast aluminium basket.

Specifications

Article number   XLS-P830452
Woofer Series   XLS Series
Woofer Type   Subwoofer
Nominal Diameter   10"
Power Handling (RMS)   150 Watts
Power Handling (max)   300 Watts
Impedance (Z)   4 ohms
Sensitivity   86.6 dB 2.83V/1m
Frequency Response   19 to 700Hz
Voice Coil Diameter   2"
DC Resistance (Re)   3.6 ohms
Voice Coil Inductance (Le)   0.99 mH
Resonant Frequency (Fs)   22 Hz
Mechanical Q (Qms)   3.86
Electromagnetic Q (Qes)   0.24
Total Q (Qts)   0.23
Diaphragm Mass Inc. Airload (Mms)   136.6g
Mechanical Compliance of Suspension (Cms)   0.39 mm/N
Surface Area of Cone (Sd)   349.7 cm²
BL Product (BL)   16.75 Tm
Compliance Equivalent Volume (Vas)   2.36 ft.³
Maximum Linear Excursion (Xmax)   12.5 mm
Cone / Diaphragm Material   Paper
Surround Material   Rubber
Basket / Frame MaterialCast    Aluminum
Magnet Material   Ferrite
Overall Outside Diameter   10.59"
Overall Depth   4.88"
Baffle Cutout Diameter   9.4"
# Mounting Holes   6
Sealed Volume   0.12 ft.³
Sealed F3   95 Hz
Vented Volume   0.24 ft.³
Vented F3   65 Hz
Download PDF File
Add to wishlist
Read more
Quick view
-17%
Compare

Peerless SLS-P830945 5-1/4″ Paper Cone Woofer 4 Ohm

₹3,750.00

PRODUCT INFO

The SLS line combines high quality performance with an affordable design. This 5.25 inch 4 ohm member of the SLS family features a rigid steel basket, a paper cone, and a ferrite magnet motor with aluminium shorting ring for improved distortion performance.
Download PDF File
Add to wishlist
Add to cart
Quick view
-27%Sold outHot
Compare

Peerless SLS 830667, 8″ Paper Cone Woofer

₹5,200.00

PRODUCT INFO

The SLS line combines high quality performance with an affordable design. This 8 inch 8 ohm member of the SLS family features a rigid steel basket, a coated paper cone, and a ferrite magnet motor with aluminium shorting ring for improved distortion performance
The Peerless SLS Series combines high quality performance with an affordable design.
Key Features
  • Premium sculpted stamped steel chassis
  • Coated paper cone with rubber edge
  • Shorting ring in magnet system
  • Peerless SLS Series 8" Coated paper cone woofer
    • Coated Paper cone
    • Rubber surround
    • Rigid stamped frame
    • Ventilated raised spider
    • Bumped back plate
    • Shorting ring
    • 213.5mm flange
    • 178mm cut out hole size
    • 100mm depth
    • 4.8mm positive terminal and 2.8mm negative terminal
    • Box suggestions:
      • 1 to 1.5 cubic feet sealed for F3 of 47Hz
      • 1.6 cubic feet with 3" vent by 6.75" long F3 of 33Hz, with +2dB bump
      • Band Pass box (no crossover needed) F3 of 31Hz on the low end and F3 of 94Hz on the high end 0.9 cubic foot sealed chamber 0.6 cubic foot vented chamber with 3" diameter by 9" long vent People often pass the vent through the sealed chamber if it is too long The woofer fires into the vented chamber
Download PDF File
Add to wishlist
Read more
Quick view
-22%Sold out
Compare

Peerless SLS 830668 10″ Woofer – Coated Paper Cone

₹6,250.00
The SLS line combines high quality performance with an affordable design. This 10 inch 8 ohm member of the SLS family features a rigid steel basket, a coated paper cone, and a ferrite magnet motor with aluminium shorting ring for improved distortion performance. Peerless 830668 10" Coated Paper Cone Woofer The Peerless SLS Series combines high quality performance with an affordable design. The SLS drivers are ideal for use in systems with high power handling requirements, and are a logical choice for use with the SDS line of transducers.
  • Coated Paper cone
  • Rubber surround
  • Rigid stamped frame
  • Ventilated raised spider
  • Bumped back plate
  • Shorting ring
  • 4.8mm positive terminal and 2.8mm negative terminal
  • Foam gasket
  • 263mm flange
  • 226mm cut out hole size
  • 123mm depth
  • Suggested box alignment:
    • 1.5 to 2.75 cubic feet sealed, with stuffing.F3 47Hz to 46Hz
    • 3.0 cubic feet ported with 3"dia x 4.5" long or 4" dia x 9.25" long. F3 30Hz
specs text
Frequency response and impedance curve
Mechanical drawing 263mm
Download PDF File
Add to wishlist
Read more
Quick view
Sold out
Compare

Peerless by Tymphany XXLS-P835017 12 Aluminum Cone Subwoofer

₹18,000.00
This series of state-of-the-art subwoofers continues to enhance Peerless's reputation for delivering the highest quality components for bass.
Highlights
  • 12.5 mm of linear excursion
  • Extremely durable aluminum cone
  • Cast aluminum frame
  • Flat spider and HD rubber half roll surround
  • Massive stacked magnet
Add to wishlist
Read more
Quick view
-31%Sold out
Compare

Peerless by Tymphany NE315W-04 12″ Subwoofer Speaker

₹17,000.00
This 12 inch 4 ohm member of the NE family has leading-edge transducer technology packaged in a cutting edge, stylistic design. The subwoofers in this family feature an innovative cast aluminium basket design which minimizes acoustic reflections inside the driver, through large basket windows and sculpted basket spokes. The basket also is designed to act as a highly coupled heat sink to the NdFeB motor, so as to improve power handling capacity. An additional heat sink is available to provide extra thermal protection if needed. The cone and dust cap are constructed of natural wood fiber material with proprietary coating formulas & processes, so as to yield high clarity products. The cone designs also utilize pentacone technology for improved frequency response. The voice coil bobbin is titanium, for improved performance. The FEA-designed motor features copper caps to minimize inductance and extend performance to high frequencies. Rounding out the design is a 4-way terminal block connector, for ease of electrical connection.
Download PDF File
Add to wishlist
Read more
Quick view
-28%
Compare

Peerless by Tymphany 830946 6-1/2″ Paper Cone Woofer Speaker 4 Ohm

₹4,700.00

Product description

The Peerless SLS Series 830946 6-1/2" woofer is a versatile, solidly-performing choice for midbass, woofer, or subwoofer applications.  

Highlights

  • Works great as a subwoofer in compact systems
  • Sculpted and vented stamped steel frame promotes motor cooling
  • Powerful ceramic magnet system with bumped back plate for full excursion
  • Coated paper cone with oversized half-roll rubber surround
  • Long-throw 1-1/2" voice coil
  • Aluminum shorting ring in magnetic gap reduces distortion
  • 4 ohm nominal impedance
 

Product details

Peerless by Tymphany SLS-P830946 6-1/2" Paper Cone Woofer   The SLS line combines high quality performance with an affordable design. This 6.5 inch 4 ohm member of the SLS family features a rigid steel basket, a paper cone, and a ferrite magnet motor with aluminium shorting ring for improved distortion performance.

Specifications

Article number  SLS-P830946
Woofer Type  Woofer
Nominal Diameter  6-1/2"
Power Handling (RMS)  75 Watts
Power Handling (max)  150 Watts
Impedance (Z)  4 ohms
Sensitivity  82 dB 2.83V/1m
Frequency Response  20 to 1,000Hz
Voice Coil Diameter  1.5"
DC Resistance (Re)  2.71 ohms
Voice Coil Inductance (Le)  0.65 mH
Resonant Frequency (Fs)  42 Hz
Mechanical Q (Qms)  4.92
Electromagnetic Q (Qes)  0.38
Total Q (Qts)  0.35
Diaphragm Mass Inc. Airload (Mms)  30.5g
Mechanical Compliance of Suspension (Cms)  0.47 mm/N
Surface Area of Cone (Sd)  123.5 cm²
BL Product (BL)  7.6 Tm
Compliance Equivalent Volume (Vas)  0.4 ft.³
Maximum Linear Excursion (Xmax)  8.2 mm
Cone / Diaphragm Material  Paper
Surround Material  Rubber
Basket / Frame Material  Steel
Magnet Material  Ferrite
Overall Outside Diameter  7.165"
Overall Depth  3.28"
Baffle Cutout Diameter  5.79"
# Mounting Holes  6
Sealed Volume  0.09 ft.³
Sealed   F395 Hz
Vented Volume  0.21 ft.³
Vented   F355 Hz
Download PDF File
Add to wishlist
Add to cart
Quick view
Sold outHot
Compare

Peerless NE225W-04 8″ Paper Cone NE Woofer 4 Ohm

₹19,999.00

PRODUCT INFO

This 8 inch 4 ohm member of the NE family has leading-edge transducer technology packaged in a cutting edge, stylistic design. The subwoofers in this family feature an innovative cast aluminium basket design which minimizes acoustic reflections inside the driver, through large basket windows and sculpted basket spokes. The basket also is designed to act as a highly coupled heat sink to the Neodymium-Iron-Boron magnet (NdFeB) motor, so as to improve power handling capacity. An additional heat sink is available to provide extra thermal protection if needed. The cone and dust cap are constructed of natural wood fiber material with proprietary coating formulas & processes, so as to yield high clarity products. The cone designs also utilize pentacone technology for improved frequency response. The voice coil bobbin is titanium, for improved performance. The FEA-designed motor features copper caps to minimize inductance and extend performance to high frequencies. Rounding out the design is a 4-way terminal block connector, for ease of electrical connection.
Download PDF File
Add to wishlist
Read more
Quick view